CABLE REQUEST FORM
PRODUCTS
MENÜ
-
Alçak Gerilim Kabloları
- Instrumentation Cables
- Overall Shielded- Unarmoured
- Overall Shielded-Armoured
- Individual Shielded -Unarmoured
- Individual Shielded - Armored Cables
- FireKab Instrumentation Cables
- PAS 5308 Cables
- Control Cables
- Power Cables
- Marine & Shipboard Cables
- Indoor Telephone and Fire Alarm Cables
- Data Transmission Cables
- Servo Motor Cables
- Cathodic Protection Cables
- UL Certified Cables
-
Yangına Dayanıklı Kablolar
SnCu/HMWPE/PVC/ SWA/SWA/HMWPE
SHARE
Product Certificates
You can click to download our certificates.
Areas of Use
CP Cable is used as direct earth burial DC feeder cable in cathodic protection systems. Anode cables for all offshore anodes that are installed with the cable lying directly on the sea bed shall be armored.*
Cable Construction
- Conductor Stranded Annealed Tinned Copper (IEC 60228, Class 2)
- Insulation High Molecular Weight Polyethylene (Black) Acc. to ASTM D1248 Type 3, Class C, Category 5, IEC 60502, ST7
- Inner Sheath PVC (Black)
- 1. Armour Round Galvanized Steel Wires
- 2. Armour Round Galvanized Steel Wires
- Outer Sheath High Molecular Weight Polyethylene (Black) Acc. to ASTM D1248 Type 3, Class C, Category 5, IEC 60502, ST7
- Reference Standards 17-SAMSS-017
Technical Properties
- Operating Voltage 0.6/1 kV
- Test Voltage 3.5 kV
- Temperature Range Operation: -30°C...+90°C, Installation: -5°C...+70°C
- Conductor Resistance IEC/EN 60228
- Min. Bending Radius 15 x Cable Diameter
Footnote
*Out of 17-SAMSS-017 scope, based on 17-SAMSS-017
*All values have ±5% tolerance