-
Alçak Gerilim Kabloları
- Instrumentation Cables
- Overall Shielded- Unarmoured
- Overall Shielded-Armoured
- Individual Shielded -Unarmoured
- Individual Shielded - Armored Cables
- FireKab Instrumentation Cables
- PAS 5308 Cables
- Control Cables
- Power Cables
- Marine & Shipboard Cables
- Indoor Telephone and Fire Alarm Cables
- Data Transmission Cables
- Servo Motor Cables
- Cathodic Protection Cables
- UL Certified Cables
-
Yangına Dayanıklı Kablolar
PT1 T2 LSZH
Areas of Use
Instrumentation cables have a wide range of usage in process control and data processes, in analog and digital signal transmission. Factories, refineries, petrochemical plants, power plants, natural gas filling plants, etc. make up the general areas that these cables are used.
Cable Construction
- Conductor Solid or Stranded Annealed Copper (IEC/EN 60228, Class 1, 2,5) -Table 1
- Insulation PE (EN 50290-2-23)
- Core Colors According to PAS 5308-1 Annex C-Table 2
- Lay-up Shielded pairs / triples are stranded in layers
- Separator PET Foil
- Overall Screen Al-PET Foil (with 7x0.3 mm Tinned Copper Drain Wire)
- Inner Sheath PE
- Armour Round Galvanized Steel Wire (Min. Diameter 0.90 mm ±0.02 mm)
- Outer Sheath Halogen Free Flame Retardant Compound (HFFR /LSZH/LSOH/FRNC) (EN 50290-2-27), RAL 9005 - Black, RAL 5015 - Blue (other colors upon request)
- Reference Standards PAS 5308 Part 1 - Type 1
Technical Properties
- Operating Voltage 300 V / 500 V
- Test Voltage Core - Core: 2000 V; Core - Screen: 1000 V
- Conductor Resistance 0.50 mm² - ≤36.8 Ω/km; 0.75 mm² - ≤24.5 Ω/km; 1.00 mm² - ≤18.4 Ω/km; 1.50 mm² - ≤12.3 Ω/km; 2.50 mm² - ≤7.6 Ω/km
- Insulation Resistance >5000 M.Ωxkm
- Capacitance Unbalance (800 Hz) ≤500 pF/500m
- Capacitance (@800Hz) Table-3
- L/R Ratio 0.50 mm²..1.00 mm² - ≤25 µH/Ω; 1.30 mm²..1.50 mm² - ≤40 µH/Ω; 2.50 mm² - ≤60 µH/Ω
- Temperature Range Fixed: -40 °C ........+70 °C, Flexible: -5 °C ........+50 °C
- Flame Retardancy IEC/EN 60332-1, IEC/EN 60332-3-24 (CAT C)
- Smoke Density IEC/EN 61034-1
- Amount of Halogen Acid Gas IEC/EN 60754-1
- Corrosive Gases Measurement IEC/EN 60754-2
- Oil Resistance IEC/EN 60811-404, ASTM No 2 oil 70 °C 4 hours
- Min. Bending Radius (Fixed) 12 x Cable Diameter
Footnote
Annex C (Normative)
Pair Identification: Two-pair cables without individual pair screens (quads) shall be color-coded in clockwise order of rotation: Black, blue, green, brown. All other cables up to 50 pairs shall be color-coded in accordance with Table C. 1.
Table C.1 Identification of cable pairs other than two -pair cables without individual pair screens (quads)
* For individually screened pairs: Black/Blue, Numbered pairs.
* Two-pair cables without individual pair screens (quads) shall be color-coded in clockwise order of rotation: Black, Blue, Green, Brown
* Single triple: Black- White-Red
